# Introduction

Dragonfly Room Reverb is a free stereo-to-stereo reverb effect. It has several different room presets, as well as a small number of hall presets and effect presets. It is based on ProG Reverb from Freeverb3VST, which uses Moorer's early reflection model and an implementation of Jon Dattorro's Progenitor Reverb algorithm.

# User Interface

## Sliders

Dry Level

  Level of the input signal sent directly to the reverb’s output

Early Level

  Level of the early reflection signal in the reverb’s output

Early Send

  Level of the early reflection signal mixed into the input to the late reverberation algorithm

Late Level

  Level of the late reverberation signal in the reverb’s output

The output of the Dry, Early, and Late controls are combined to form the reverb’s output signal. Note that sliders are not controlled by the presets. This allows you to set the levels in a way that works for your project, and then explore different presets without the sliders changing.

## Basic Dials

Note that holding the Shift key and clicking a dial will reset the dial to the default for the current preset.

Size

  Length of the reverb’s internal delay lines. Increasing the Size parameter generally leads to a smoother, less resonant output however it can also increase the reverb’s attack time and make individual early reflections more audible. Decreasing the Size parameter generally has the opposite effect, decreasing the reverb’s attack time and making individual early reflections less audible although it can increase the presence of metallic resonances.

  In physical terms, the Size control corresponds to the largest dimension of an imaginary space. When the size is small, the “walls” of this space are closer together and the resultant reflection density increases. When the size is large, that reflection density decreases.

Width

  The Width control sets the output stereo width. Note that this applies to both the early reflections and the late reverberation.

Predelay

  Delay before the onset of the late reverberation.

  Note that only the late reverberation is delayed. Early reflections are always output immediately. You can see this by doing the following:

  - Set Early Level to 100% and Late Level to 0%.
  - Observe on the spectrogram that changing the Predelay does not move the early reflections.
  - Set Early Level to 0% and Late Level to 100%.
  - Observe on the spectrogram that changing the Predelay moves the late reverberation.
Decay
  Length of time for the late reverberation to decrease by 60dB.

## Preset Browser

The Preset Browser section presents the user with a range of room, hall, and effect presets.

## Spectrogram

The spectrogram has been included so that the user can get a better idea of how the various reverb parameters affect the plug-in’s output. The spectrogram is rendered by simulating a burst of white noise through the reverb algorithm with the current settings, and then processing the output with a fast fourier transform algorithm.

Clicking on the “?” displays the plugin name, version, license, and credits.

## Advanced Dials

Diffuse

  Adjusts the coefficients of the allpass filters in the late reverberation algorithm. It enables the user to balance echo density against unpleasant colouration so that the result enhances rather than detracts from the audio input signal.

  A challenge that the designers of early digital reverbs faced was generating a realistic number of early reflections or echo density. One solution to this problem was to use allpass filter networks. Although successful in increasing echo density, the downside of allpass filter networks is that they have a tendency to resonate, particularly when the input signal is impulsive. This means that there is a tradeoff between echo density and colouration.

  In general, low echo density or diffusion settings increase the perception of discrete echoes. In the case of transient-rich sounds this can lead to “machine-gun-like” effects in which individual echoes are heard. For sustained sounds, this is less of an issue. Increasing the Diffusion setting makes individual echoes less perceptible and generally leads to a smoother, more lush reverb sound however it also can introduce metallic resonances which can be noticeable but depend to a large extent on the nature of the input signal.

  To better understand the effects of the Diffuse control, open a track with clear percussive sounds. Decreasing the Diffuse value will result in fewer, more discrete reflections in the late reverberation. When set at very low values the late reverberation has an almost "shattering" sound to it. A higher Diffuse setting results in the late reverberation having a smoother and richer sound.

Spin

  Rate of modulated chorus effect on the late reverberation. Higher Spin values can lead to an audible “wobble” particularly in real instruments such as acoustic guitar or piano and can also cause noise on pure tones. This effect tends to be less noticeable on speech.

Wander

  Length of modulated chorus effect on the late reverberation, measured in milliseconds.

  To better understand the effects of Spin and Wander, set a large room size, a long delay, Modulation to 100%, and Wander to 0%. Then play an abrupt sound such as a percussion hit or a chord on piano or guitar. You'll notice the reverb tail panning alternately left and right in the stereo field at the rate set by Spin control. There are multiple layers to the late reverberation, but they are all synchronised in the stereo space when Wander is set to 0 ms. Next, increase the Wander setting, which will make the layers spread out in the stereo space. The layers all still spin at the same rate, but at any given time each one has its own location in the stereo field.

High Cut

  Low pass filter frequency applied to the input signal before it is processed by the early reflection and late reverberation algorithms.

Early Damp

  Low pass filter frequency applied to the output signal of the early reflection algorithm.

Late Damp

  Low pass filter frequency applied to the output signal of the late reverberation algorithm.

Low Cut

  High pass filter frequency applied to the input signal before it is processed by the early reflection and late reverberation algorithms.

Low Boost

  Increases the decay time for a band of low frequencies. Note that the boost feature does not have a significant effect with a short decay time of less than 1s.

Boost Freq

  Approximately the top of the frequency band to be boosted.